Table of Contents
Advertisement
NOTE
White Balance may not work correctly in the following conditions:
* When there is a very high colour temperature within the subject, for example a sunset in a clear sky.
* It is very dark
* If the camera is pointed towards fluorescent light, or there is a drastic change in lighting, the White
Balance operation may become unstable.
* In these conditions, AWB mode is recommended.
The Day & Night menu is used to set the camera video output.
1. Select Day & Night using the Up or Down button on the set up menu screen.
2. Select the desired mode using the Left or Right buttons.
•
Colour: The video output remains in colour mode at all times.
•
B/W: The video output remains in monochrome at all times.
- Burst: Removes the colour element and makes the video output monochrome.
- Smart IR: Eliminates IR saturation caused by objects which are close to the camera. Only for
cameras equipped or used with IR LED's.
•
Auto: Automatically switches to colour during daytime and monochrome at night time, or low light
environments. The switching time is adjustable - both day to night and night to day.
•
EXT: Select the mode using the Right or Left button.
Day & Night
SETUP
LENS
EXPOSURE
WHITE BAL
DAY&NIGHT
3DNR
SPECIAL
ADJUST
RESET
EXIT
DAY&NIGHT B/W
BURST
IR SMART
RETURN
DAY&NIGHT AUTO
DELAY
IIII IIIIIIIIIIIIIIII
D → N(AGC)
IIIIIIII IIIIIIIIIIII
N → D(AGC)
IIIIIIIIII IIIIIIIIII
RETURN
High Resolution 700TVL Cameras
DC
ATW
COLOR
ON
OFF
ON
RET
|
5
|
60
|
20
RET
15
Hide quick links:
Advertisement
Table of Contents
