Turning On The Power; Turning On The Main Power - Ricoh 4051 Operating Instructions Manual

Turning On the Power

This machine has two power switch-
es.
❖ ❖ ❖ ❖ Operation switch (right side of the
control panel)
Press to activate the machine.
When the machine has finished
warming up, you can make copies.
❖ ❖ ❖ ❖ Main power switch (left side of the ma-
chine)
Turning off this switch will com-
pletely turn off power to the ma-
chine.
Note
❒ This machine automatically enters
Energy Saver mode or turns itself
off if you do not use it for a certain
period. See p.60 "Auto Off Timer",
p.60 "Energy Saver Timer".

Turning On the Main Power

A A A A
Make sure that the power cord is
firmly plugged into the wall out-
let.
B B B B
Open the switch cover and turn
on the main power switch.
The main power indicator turns
on.
Important
❒ Do not turn off the main power
immediately after it has been
turned on. Otherwise it may re-
sult in damage to the hard disk
or memory, leading to the mal-
functioning of the machine.
Turning On the Power
A A A A
Press the operation switch.
The On indicator lights up
Note
❒ If the power is not turned on
when the operation switch is
pressed, check if the main pow-
er switch is on. If not, turn it on.
ZGVH391N
Turning On the Power
ZGVS310N
27
1