Frymaster 8196203 Installation, Operation, Service, And Parts Manual page 52

8.2.1 Backs, Control Panels, Doors, Handles, Sides, Tilt Housings & Top Caps
(cont.)
ITEM PART #
1 230-0675
230-0676
230-0677
230-0546
2 230-0672
230-0673
230-0674
230-0500
3 106-5016
106-5221
106-5018
106-7533
4 823-5567
823-5484
824-5493
823-6054
5 106-5195
106-5196
106-5197
106-7531
* 200-9614
200-9610
200-9611
6 106-4979
* 824-1516
* 210-9215
* 809-0500
* 826-1343
* 210-9188
*
106-4769
7 809-0266
8 210-9214
9 106-0554
* 826-1343
10 231-1558
231-0326
232-1558
232-0326
11 810-1105
* 809-0123
* 826-1376
* 809-0970
*
823-0839
823-2908
823-4585
823-6049
12 823-5440
13 230-2191
14 230-2097
230-2193
*Not illustrated.
Back Panel, Upper - Single
Two Station Fryer
Three Station Fryer
Four Station Fryer
Back Panel, Center - Single
Two Station Fryer
Three Station Fryer
Four Station Fryer
Frame, Control Panel - Single
Two Station Fryer
Three Station Fryer
Four Station Fryer
Tilt Housing - Single
Two Station Fryer
Three Station Fryer
Four Station Fryer
Top Cap - Single
Two Station Fryer
Three Station Fryer
Four Station Fryer
Heat Shield - Single
Two/Four Station Fryer
Three Station Fryer
Door Assembly - Single (includes items below plus 210-9214)
Door, Universal Single
Liner, Door Universal Single
Screw, #10 – ½ Hex TR HD SS
Spring, Door Pin Hinge (Pkg. of 10)
Hinge, Door Single
Door, Left or Right (Left shown – move handle to opposite side for Right)
Two and Three Station Fryers
Screw, #10 X ½-inch Phillips Truss Head
Handle, Door
Pin Assembly, Door
Spring, Door Pin Hinge (Pkg. of 10)
Side, Cabinet Left, Single
Two or Three Station
Side, Cabinet Right, Single
Two or Three Station
Magnet, Door
Screw, #10 –3/4 Truss Slotted Head
Nut KEPS 10-32 HX ZP (Pkg. of 10)
Retaining Ring – Door Hinge Pin
Handle (Grab Rail) – (For handle end use 910-0915)
Single Station Fryer
Two Station Fryer
Three Station Fryer
Four Station Fryer
Cove, Element Tilt Housing
Bezel, One-Controller
Bezel, Two/Four-Controller
Bezel, Three-Controller
COMPONENT
8-3