Setting The File Number - Samsung VP-D371i Owner's Instruction Manual

ENGLISH Digital Still Camera Mode
(VP-D375W(i)/D975W(i) only)

Setting the File Number

File Number setting works only in <M.Cam> mode.
File Numbers are given to images in the order they were recorded
when they are stored on the Memory Card.
File numbers may be set as follows:
- <Series> : When there are existing files, the new image will be
named as the next number in the sequence.
- <Reset>: When there are no files stored on the Memory Card, the
file numbering starts from 0001.
1. Set the [Power] switch to the [CAMERA].
2. Set the [Mode] switch to [CARD].
3. Press the [MENU] button.
The menu list will appear
4. Press the [... ... / † † ] button to select <Memory>,
then press the [OK] button.
5. Press the [... ... / † † ] button to select <File No.>,
then press the [OK] button.
6. Press the [... ... / † † ] button to select the desired option
<Series> or <Reset>, then press the [OK] button.
7. To exit, press the [MENU] button.
[ Note ]
When you set <File No.> to <Series>, each file is assigned with a
different number so as to avoid duplicating file names. It is convenient
when you want to manage your files on a PC.
76 76
(
page 19
- <Series>
- <Reset>
4
M.Cam Mode
√Memory
√Super Fine
Photo Quality
√Series
File No.
Move OK Select MENU Exit
6
M.Cam Mode
Back
Photo Quality
File No.
Series
Reset
Move OK Select MENU Exit
[ ]
<File No.>
VP-D375W(i)/D975W(i))
<M.Cam>
0
0001
0
1. [Power]
2. [Mode]
3. [MENU]
0
0
[... ... / † † ]
4.
[OK]
0
[... ... / † † ]
5.
0
[... ... / † † ]
6.
<Reset> [OK]
7. [MENU]
<Series>
PC
0
19
0
0
[CAMERA]0
[CARD]
0
<Memory>
<File No.> [OK]
<Series>
0
0
0