Setting The File Number (File No.) - Samsung SC-DC163 Owner's Instruction Manual

I ENGLISH I
Digital Still Camera Mode
+ File Number setting works only in M.Cam Mode. ",page 26
+ File Numbers are given to images in the order they were recorded when they are stored on the Memory Card.
*:o File numbers may be set as follows:
- <Series>: When there are existing files, the new image witl be named as the next number in the sequence.
- <Reset>: When there are no flies stored on the Memory Card_ the file numbering starts from 0001.
1. Set the [Mode] switch to [CARD].
2. Set the [Power] switch to [1_ (Camera)].
3. Press the [MENU] button.
= The menu list witl appear.
4. Move the (Joystick] up or down to select <Memory>, then press the [Joystick(OK)].
5. Move the [Joystick] up or down to select <File No.>, then press the [Joystick(OK]].
6. Move the [Joystick] up or down to select desired option (Series or Reset), then press [_ J _'
the [Joystick(OK)[.
= The selected option is applied.
7. To exit, press the [MENU] button.
_Move _SeJect _Exit.