Searching Quickly For A Desired Scene (Setting The Zero Memory); (Vp-D375W(I)/D975W(I) Only); Vp-D375W(I)/D975W(I) - Samsung VP-D371i Owner's Instruction Manual

ENGLISH
Basic Recording
Searching quickly for a desired scene (Setting the
ZERO MEMORY) (VP-D375W(i)/D975W(i) only)
The ZERO MEMORY function works in both <Camera> and
<Player> modes. page 19
You can mark a point on a tape that you want to return to following
playback.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].
3. Press the [ZERO MEMORY] button on the remote
control before the recording or during playback at the
point where you wish to return.
The time code is changed to a tape counter that
is set to ZERO MEMORY with the <
(ZERO MEMORY indicator).
If you want to cancel the ZERO MEMORY
function, press the [ZERO MEMORY] button
again.
4. Finding the zero position.
When you have finished playback, fast forward or
rewind the tape in stop mode.
The tape stops automatically when it reaches the
zero position.
When you have finished recording, set the
[Power] switch to [PLAYER] and press the
[œ œ œ œ (REW)] button.
The tape stops automatically when it reaches the
zero position.
5. The tape counter with the <
disappears from the display and the tape counter is changed to the
time code.
[ Notes ]
In the following situations, ZERO MEMORY mode may be canceled
automatically:
- At the end of the section marked with the ZERO MEMORY
function.
- When the tape is ejected.
- When you remove the Battery Pack or power supply.
The ZERO MEMORY may not function correctly where there is a
break between recordings on the tape.
1
0:00:00>
> (ZERO MEMORY indicator)

VP-D375W(i)/D975W(i)

<Camera>
1. [Power]
[PLAYER]
2. [Mode]
3.
[ZERO MEMORY]
[ZERO MEMORY]
4.
0
œ
[PLAYER]
œ œ œ œ
5. <
0
[ ]
-
-
0
-
<Player> 19
0
0
[CAMERA]
0
[TAPE]
0
< 0:00:00>
0
0
0
0
[Power]
[œ œ œ œ (REW)]
0
0
>
0
0
0
0
37 37