Samsung VP-D371i Owner's Instruction Manual page 66

ENGLISH
Playback
Connecting to a TV which has no Audio/Video Input
Jacks
You can connect your Camcorder to a TV
through a VCR.
1. Connect the Camcorder to your VCR
with the Audio/Video Cable.
The yellow jack: Video
The white jack: Audio(L) - Mono
The red jack: Audio(R)
2. Connect a TV to the VCR.
3. Set the [Power] switch to [PLAYER].
4. Set the [Mode] switch to [TAPE].
(VP-D375W(i)/D975W(i) only)
5. Turn on both the TV and VCR.
Set the input selector on the VCR to
Line.
Select the channel reserved for your
VCR on the TV set.
6. Play the tape.
Playback
1. Connect a power source and set the [Power] switch
to [PLAYER].
2. Set the [Mode] switch to [TAPE].
(VP-D375W(i)/D975W(i) only)
3. Insert the tape you wish to play back.
4. Using the [œ œ œ œ (REW)]/[√ √ √ √ (FF)] buttons, find the first
position you wish to play back.
5. Press the [√ √ (PLAY/STILL)] button.
The images you recorded will appear on the TV
after a few seconds.
If a tape reaches its end while being played back, the tape will
rewind automatically.
[ Notes ]
The playback mode (SP/LP) is selected automatically.
If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
66 66
VCR
Camcorder
TV
Signal flow
Audio/Video
Cable
Antenna
VP-D371(i)/D371W(i)/
VP-D375W(i)/D975W(i)
D372WH(i)
[
/
0
1.
Audio/Video
VCR0
Cable
2.
3. [Power]
0
4. [Mode]
0(
5.
VCR
0
6.
1. [Power]
[PLAYER]
2. [Mode]
( VP-D375W(i)/D975W(i))
3.
[œ œ (REW)]
4.
[√ √ (PLAY/STILL)]
5.
0
]
(SP/LP)0
Audio L
0
VCR
Audio(L) -
Audio(R)
VCR0
[PLAYER]
[TAPE]
VP-D375W(i)/D975W(i))
VCR0
Line
VCR
0
0
0
[TAPE]
0
0
/[√ √ √ √ (FF)]
0
/
0
0