Starting Up In The Command Mode; Installing The Printer Driver - Command Mode - Xerox DocuPrint C1618 Operation Manual

3.4
The following can be started up by entering the command in the Ezlnst folder of the CD-
ROM directly (in command mode).
The command mode is a start up method and can be used in operations such as batch processing.
Installing the printer driver P. 40
G
Installing the printer driver by using the created setup disk P. 41
G
G Deleting the installed printer icon P. 42
Uninstalling the installed printer driver P. 43
G
3.4.1
Installing the Printer Driver - Command
Mode
3
For Windows NT 4.0/Windows 2000/Windows XP, log on as a user of the administrator group
or as the administrator.
Command line
Parameter
Model ID
Startup example
Error Display
40
Starting up in the
Command Mode
SETUP /m Model ID (
/m Specify the model ID and run setup.
It can be specified in upper or lower case, single byte
characters.
Enter the ID of the model to be installed after the option (/m)
Enter the model ID in upper case, single byte characters.
Model ID
DPC1618
SETUP /mDPC1618
(when installing DocuPrint C1618 printer driver)
When you have entered an incorrect parameter, a "Invalid
parameter" dialog box will appear. In this case, click OK to endthe
operation.
indicates spacing)
Model to be installed
DocuPrint C1618