Table of Contents
Advertisement
The procedure for loading transparencies is as follows:
2.4 Printing on Special Media
Lift the A3 oversize guide and make sure that
the paper guide matches with the paper size
scale.
Fan the transparencies in small quantity.
Insert the transparency gently into the feeding
slot of the manual tray.
Do not use full colour
transparencies for full colour
jobs as this may cause paper jam
and fuser fault.
Once the transparency is set properly, send a
print command from your application software.
Specify the items shown in the next section
"Printer Driver Settings (when printing on
transparencies)" in the printer driver.
2
47
Advertisement
Table of Contents
