Table of Contents
Advertisement
4.4 Print Quality Problems
Description
(From previous page)
Wrinkled paper
4
Printing is smudged
Printing is slanted
90
Possible Cause
Are there scraps of paper or
other objects in the printer?
Is the D spacer removed from
the printer?
Is the paper damp?
Did you use the recommended
paper type?
Are the guide clips of the paper
tray in the correct positions?
Is the paper guide of the manual
tray aligned at the scale of the
paper to be used?
Is the A3 oversize guide lifted
when loading paper other than
A3 oversize on the manual tray?
Solution
Switch off the power and remove these
objects from the printer.
If you have difficulties removing these
objects from the printer without
disassembling it, contact your Xerox
Customer Support Centre.
Remove the D spacer.
1.1 Removing the
Packing Tape and
Spacers in the Setup
Guide
Replace with new paper stock.
"2.2 Loading Paper"
Replace with paper of the
recommended size and type.
"2.1 Paper Handling"
Adjust the vertical and horizontal guide
clips fo the paper tray to their correct
positions.
"2.2 Loading Paper"
Adjust the paper guide in the manual
tray to the correct position.
"2.2.2 Loading Paper on
the Manual Tray"
Lift the A3 oversize guide when loading
paper other than A3 oversize.
"2.2.2 Loading Paper on
the Manual Tray"
Advertisement
Table of Contents
