Adjust Btr; Low Toner Alert Msg - Fuji Xerox DocuPrint P255 dw User Manual

• Low Toner Alert Msg

Purpose:
To specify whether to show the alert message when the toner is low.
Values:
Off
On*
* Factory default menu setting
Maintenance
Use the Maintenance menu to adjust print settings for each paper type, initialize the Non-Volatile
Memory (NVM), and change the toner cartridge settings.
• F/W Version
Purpose:
To display the version of the controller.

• Adjust BTR

Purpose:
To specify a voltage of the transfer roller (BTR) for optimum printing of each paper type. To lower the
voltage, specify a negative value. To increase, specify a positive value.
The default settings may not yield the best output on all paper types. If you see mottles on the print
output, try increasing the voltage. If you see white spots on the print output, try decreasing the voltage.
NOTE:
• The print quality depends on the values you select for this menu item.
Values:
Plain
Light Card
Labels
Envelope
Recycled
Postcard
* Factory default menu setting
170 Using the Operator Panel Menus
Does not show the alert message when the toner is low.
Shows the alert message when the toner is low.
0*
-3 - 3
0*
-3 - 3
0*
-3 - 3
0*
-3 - 3
0*
-3 - 3
0*
-3 - 3