Wireless Security - Planet WAP-6000 User Manual

Network mode
Wireless mode
SSID
Site Survey
The Site Survey page can help you identify all available APs in your environment. Just easily click on the
BSSID column; the system will join you to the SSID you specify after reboot. In the Site Survey page you
can also see the details of all SSID currently available.

4.2.3 Wireless Security

In Wireless client mode, WAP-6000 has support WEP and WPA-PSK security mechanisms. Please refer
to section 4.1.7 for detailed descriptions of the security configuration.
- -
You can set the wireless client into 2 different modes by clicking radio button.
Wireless Client (Infrastructure) act as an AP client while Ad-hoc can support
peer-to-peer network. The Infrastructure mode can support up to 108M
SuperG transmission.
Select the proper mode according to your wireless network.
The SSID is the unique name shared among all points in a wireless network.
The SSID must be identical for all points in the wireless network. It is
case-sensitive and must not exceed 32 alphanumeric characters, which may
be any keyboard character. You can choose "Attach to any available
SSID"; system will determine the Access Point currently available and
establish connection with that Access Point. If you already understand your
wireless environment well, you can type in the SSID in "Specify the static
SSID" manually.
Moreover, you can easily click on the "Site Survey" to find all wireless
networks available in your current environment. Please refer to the
description below.
23