Network type
SSID
BSSID
Connection status
Wireless mode
Current channel
Security
Rx data rate (Mbps)
Tx data rate (Mbps)
Link quality
Signal strength
Activity
4.2.2 Wireless Network
- -
Here indicates the WAP-6000 works in AP mode or Client mode
(Infrastructure mode / Ad Hoc mode).
Here displays current SSID assigned to the WAP-6000.
The MAC address of the associated AP.
This column shows current connection status. If WAP-6000 already connects
to an Access Point or station, here will show "Associated". Otherwise,
connection column will show "N/A" which means no connection to any
Access Point or station.
Here show the Access Point current work in 11b, 11g, or super G mode.
This column indicates the radio channel currently in use.
Here indicates AP security settings in client mode. Should be either
"Disabled", "WEP" or 'WPA-PSK".
Displays current receive data rate.
Displays current transmit data rate.
This column shows current link quality with AP in 0 to 100 percentage scale.
This column shows current signal strength with AP in 0 to 100 percentage
scale.
Displays the number of packets received and transmitted through this
WAP-6000.
22