Ip Settings - Planet WAP-6000 User Manual

Administrator Name
Password
Confirm Password

4.1.5 IP Settings

This page can configure system IP address. Default IP address is 192.168.1.1 and Subnet Mask is
255.255.255.0. You can manually input IP address setting or get an IP from a DHCP server.
IP Network Setting
IP Address
IP Subnet Mask
Default Gateway
- -
You change the administrator login name in this field.
Type the new password here if you need to change it.
Re-type the new password again, then click the "Apply" below to save the
changes.
Here you can choose to get IP from a DHCP server or specify IP address
manually. Choose to obtain an IP address from DHCP server if your
environment or ISP provide DHCP server. Otherwise, you must manually setup
IP address.
If you select "Specify an IP address", you must enter an unique IP address
here.
The Subnet Mask must be the same as your Ethernet network setting.
Enter the IP address of your gateway here. If your network does not have a
Gateway, you can leave this field blank.
12