Adding Port Interfaces - Motorola Netopia Embedded Software Handbook

3-20 Administrator's Handbook

Adding Port interfaces

Note:
You must first ADD the VLAN before associating the Inter-VLAN-Routing Groups or the Port Interfaces.
Once you have added the VLAN, you access the Inter-VLAN-Routing screen and the Add Port Interface screen by
selecting Display/Change VLAN from the VLAN Configuration screen.
Once you have created a VLAN entry you must associate it with a port interface. This interface may be either a
physical port, such as USB or Ethernet, or a Network ID (SSID) of a wireless LAN. If you have a Motorola
®
Netopia Router model that offers Motorola's VGx technology, you can also associate a VLAN with each of the
physical Ethernet managed switch ports.
When setting up a VLAN, typically you will add one or more physical ports, such as an Ethernet port or a
wireless SSID.
Note:
You can associate two VLANs, one of which is 802.1x authenticated and the other is not, with the
same port. This allows you to have authenticated access for PCs on the wired-or wireless LAN to
non-authenticated devices such as print servers.
Return to the VLAN Configuration screen, select Display/Change VLAN, and from the pop-up menu, select the
VLAN ID to be modified.
VLAN Enable:
Display/Change VLAN...
Add VLAN...
Delete VLAN...
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
The Display/Change VLAN screen appears.
VLAN Configuration
Authentication Server|
+----------VLAN ID: NAME----------+
+---------------------------------+
| 10: Network A
|
|
|
|
|
|
+---------------------------------+
|
|
|
|
|
|
|
|