Motorola Netopia Embedded Software Handbook page 140

4-32 Administrator's Handbook
Select Show/Change Public Range, then Easy-PAT Range, and press Return. Enter the value your ISP assigned
for your public address (206.1.1.6, in this example). Toggle Type to pat. Your public address is then mapped to
the remaining private IP addresses using PAT. (If you were not using the Easy-PAT Range and Easy-PAT List that
are created by default by using Easy Setup, you would have to define a public range and map list. For the
purpose of this example you can just alter this range and list.)
Range Name:
Type...
Public Address:
First Public Port:
Last Public Port:
CHANGE NAT PUBLIC RANGE
Select CHANGE NAT PUBLIC RANGE and press Return. This returns you to the Network Address Translation
screen.
Select Add Public Range and press Return. Type a name for this static range, as shown below. Enter the first
and last public addresses your ISP assigned in their respective fields as shown. The first five public IP
addresses (206.1.1.1 - 206.1.1.5, in this example) are statically mapped to the first five corresponding private
IP addresses (192.168.1.1 - 192.168.1.5).
System
Main
Menu
Configuration
Change NAT Public Range
Network Address
Translation (NAT)
Easy-PAT Range
pat
206.1.1.6
49152
65535
CANCEL