Backup Configuration Screen - Motorola Netopia Embedded Software Handbook

Modem Dialing Prefix:
PBX Dialing Prefix:
Line Directory Number:
Speaker On...
Speaker Volume...
Answer Incoming calls...
Country...
Enter the dialing prefix to be sent to all modems.
•
Modem Dialing Prefix: ATDT is the standard Hayes-compatible code for alerting the modem itself. You
probably don't need to change this, unless you have a good reason and are familiar with the Hayes modem
command set.
•
PBX Dialing Prefix: If you are connected to a Centrex or PBX phone system that requires you to dial a prefix
number (such as "9" for an outside line), enter it here.
•
Line Directory Number: Enter the telephone number for the line you are connected to.
•
Speaker On: You can set how you want to hear dialing and connection tones generated by the modem, or
you can turn them off, from the pop-up menu. Options are: Never, Until Carrier, During Answer, Always.
•
Speaker Volume: You can set how loud the modem tones will be from the pop-up menu: 1-Softest,
2-Medium, 3-Loudest.
•
Answer Incoming calls: You can determine whether or not the modem will respond to incoming calls on
this line, from the pop-up menu: Always or Never.
•
Country: Select your country from the pop-up menu.
When you are finished, press Escape.
Backup Configuration screen
Navigate to the Backup Configuration screen.
Main
Menu
Internal Modem Setup
WAN Advanced Connection
Configuration
ATDT
Until Carrier
2-Medium
Always
United States
Options
Line Backup 8-9
Backup
Configuration