Table of Contents
Advertisement
LOG-ON
LOG-ON
IPW2000
On the Address settings menu screen (See Figure 5),
Select Alias 2 (Press ' ', ' ' button )
Key in your Alias 2 (and optionally your pin2 code)
Figure 5
Press the LOG-ON soft-key
If you logged on successfully, the display will display
your extension number and SEARCH soft-key, and the
phone is ready for use (idle state - See Figure1).
If only the Alias 1 is registered , the display shows your
extension number, LOG-ON soft-key, and the IP phone
is ready for use (idle state).
If " NOT REG. " is displayed on the screen after you
make an attempt to log on, enter a PIN number using
the following procedure
Press the LOG-ON soft-key again
On the Address settings menu screen,
Select PIN 1 or PIN 2 (Press ' ', ' ' button)
Note: the same PIN is used for both Line1 and Line2
Enter your PIN number
Log On / Off
10
Advertisement
Table of Contents
