Operating Hints For Windtrim Mode - Raymarine ST1000 Plus Tiller Pilots Owner's Handbook Manual

Hide thumbs Also See for ST1000 Plus Tiller Pilots:
Table of Contents

Advertisement

Chapter 2: Using the Tiller Pilot
To cancel the wind shift alarm:

Operating hints for WindTrim mode

check that the new course does not take the boat into danger
press standby and auto together momentarily to accept the
alarm and reset the wind shift alarm value to the current compass
heading
WindTrim filters the wind vane output. This provides optimum
response for offshore conditions where genuine shifts in wind
direction occur gradually.
In gusting and unsteady inshore conditions, it is best to sail a few
degrees further off the wind so that changes in apparent wind
direction can be tolerated.
It is important to minimize the amount of standing helm through
careful sail trimming and positioning of the mainsheet traveller.
It is recommended that the headsail and mainsail are reefed a little
early rather than too late.
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

St2000 plus tiller pilots

Table of Contents