Electromagnetic Immunity - Seagate ST200FP0021 Product Manual

2.9.6.1 Operating vibration
The maximum random vibration levels that the drive may experience while meeting the performance standards specified in
this document are specified below. This specification does not cover connection issues that may result from testing at this
level.
20–2000 Hz 11.08 Grms
2.9.6.2 Nonoperating vibration
The maximum random nonoperating vibration levels that the drive may experience without incurring physical damage or
degradation in performance when subsequently put into operation are specified below.
20–2000 Hz 11.08 Grms
2.10 E
LECTROMAGNETIC IMMUNITY
When properly installed in a representative host system, the drive operates without errors or degradation in performance
when subjected to the radio frequency (RF) environments defined in the following table:
Table 8 Radio frequency environments
T D
EST
Electrostatic discharge Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV
Radiated RF immunity 80 to 1000 MHz, 3 V/m,
80% AM with 1 kHz sine
900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz
Electrical fast transient ± 1 kV on AC mains, ± 0.5 kV on external I/O
Surge immunity ± 1 kV differential, ± 2 kV common, AC mains
Conducted RF immunity 150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine
Voltage dips, interrupts 0% open, 5 seconds
0% short, 5 seconds
40%, 0.10 seconds
70%, 0.01 seconds
S 600 P SSD P
EAGATE RO RODUCT
ESCRIPTION
M , R . A
ANUAL EV
P R
ERFORMANCE EFERENCE
LEVEL STANDARD
B EN 61000-4-2: 95
A EN 61000-4-3: 96
ENV 50204: 95
B EN 61000-4-4: 95
B EN 61000-4-5: 95
A EN 61000-4-6: 97
C EN 61000-4-11: 94
C
C
B
15