Page 1
Product Manual ® Seagate Desktop HDD Standard models Self-Encryption models ST3000DM001 ST3000DM002 ST2000DM001 ST2000DM002 ST1500DM003 ST1000DM004 ST1000DM003 ST750DM003 ST500DM002 ST320DM000 ST250DM000 Gen 14 100686584 Rev. K August 2014...
Page 2
Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners. No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1(877-782-8351) to request permission.
Authorized Service Centers For information regarding Warranty Support, visit: http://www.seagate.com/support/warranty-and-replacements/ For information regarding data recovery services, visit: http://www.seagate.com/services-software/data-recovery-services/ For Seagate OEM and Distribution partner portal, visit: http://www.seagate.com/partners For Seagate reseller portal, visit: http://www.seagate.com/partners/my-spp-dashboard/ Seagate Desktop HDD Product Manual, Rev. K...
• Native Command Queueing with command ordering to increase performance in demanding applications. • Full-track multiple-sector transfer capability without local processor intervention. • Seagate AcuTrac™ servo technology delivers dependable performance, even with hard drive track widths of only 75 nanometers.
SATA ports are represented to host software as a Device 0 (master) and Device 1 Note (slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave environment manages two sets of shadow registers. This is not a typical SATA environment. Seagate Desktop HDD Product Manual, Rev. K...
Power-on to ready, 2.5A <10.0s spin-up code option (typical) Standby to ready (max) <17.0s <10.0s Average seek, read (typical) <8.5ms typical Average seek, write (typical) <9.5ms typical Startup current 12V 2.0A or 2.8A 2.0A Seagate Desktop HDD Product Manual, Rev. K...
Page 10
** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. * ** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. Seagate Desktop HDD Product Manual, Rev. K...
Page 11
Operational shock (max) 70 Gs at 2ms Non-operational shock (max) 350 Gs at 2ms 2Hz to 22Hz: 0.25 Gs, Limited displacement Vibration, operating 22Hz to 350Hz: 0.50 Gs 350Hz to 500Hz: 0.25 Gs Seagate Desktop HDD Product Manual, Rev. K...
320GB 625,142,448 ST250DM000 250GB 488,397,168 *One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. Seagate Desktop HDD Product Manual, Rev. K...
(such as track-to-track and average), are expected to meet the noted values. Note However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications. Seagate Desktop HDD Product Manual, Rev. K...
Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location. • Standby mode During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down mode. Seagate Desktop HDD Product Manual, Rev. K...
Page 16
Sleep 0.79 0.350 0.010 *During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels. †5W IDLE with DIPLM Enabled Seagate Desktop HDD Product Manual, Rev. K...
If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disk access is necessary. Seagate Desktop HDD Product Manual, Rev. K...
–304.8m to 3048m (–1000 ft. to 10,000+ ft.) Non-operating –304.8m to 12,192m (–1000 ft. to 40,000+ ft.) Maximum storage condition not to exceed 90 days at a wetbulb temperature of 32°C (example: 34°C / 90& RH) Note Seagate Desktop HDD Product Manual, Rev. K...
The maximum non-operating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below. 5Hz to 22Hz 3.0 Gs (Limited displacement) 22Hz to 350Hz 3.0 Gs 350Hz to 500Hz 3.0 Gs Seagate Desktop HDD Product Manual, Rev. K...
Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389- 7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone ratios according to Annex D of the ECMA-74 standards.
EN 55022, Class B and the immunity levels are defined by EN 55024. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives.
As a subassembly, no Federal Communications Commission verification or certification of the device is required. Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules.
The silver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%.
For installations which require cables, users can connect the drive as illustrated in Figure 1 Figure 1 Attaching SATA cabling Signal connector Power connector Signal cable Power cable Each cable is keyed to ensure correct orientation. Desktop HDD drives support latching SATA connectors. Seagate Desktop HDD Product Manual, Rev. K...
3 MINIMUM THREAD DEPTH 0.15 MAXIMUM FASTENER PENETRATION 2x 3.750 in 95.25 mm Drawings are for mounting hole reference only. Note PCBA show in pictorial only and can vary based on specific customer configurations. Seagate Desktop HDD Product Manual, Rev. K...
3 MINIMUM THREAD DEPTH 0.15 MAXIMUM FASTENER PENETRATION 2x 3.750 in 95.25 mm Drawings are for mounting hole reference only. Note PCBA show in pictorial only and can vary based on specific customer configurations. Seagate Desktop HDD Product Manual, Rev. K...
In case of conflict between this document and any referenced document, this document takes precedence. The Trusted Computing Group (TCG) is an organization sponsored and operated by companies in the computer, storage and digital communications industry. Seagate's SED models comply with the standards published by the TCG.
In addition to providing a locking mechanism to prevent unwanted firmware download attempts, the drive also only accepts download files which have been cryptographically signed by the appropriate Seagate Design Center. Three conditions must be met before the drive will allow the download operation: 1.
3. There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed in a blind-mate backplane configuration. • All used voltage pins (V ) must be terminated. Seagate Desktop HDD Product Manual, Rev. K...
Words 54–58, 64–70 and 88 are valid 0007 Number of current logical cylinders xxxx Number of current logical heads xxxx Number of current logical sectors per logical track xxxx 57–58 Current capacity in sectors xxxx Seagate Desktop HDD Product Manual, Rev. K...
Page 33
Ultra DMA support and current mode (see note following this table) xx7F Security erase time 0039 Enhanced security erase time 0039 Master password revision code FFFE Hardware reset value xxxx Automatic acoustic management 8080 95–99 ATA-reserved 0000 Seagate Desktop HDD Product Manual, Rev. K...
Page 34
SMART error login is supported. SMART self-test is supported. Media serial number is supported. Media Card Pass Through Command feature set is supported. Streaming feature set is supported. GPL feature set is supported. Seagate Desktop HDD Product Manual, Rev. K...
Page 35
Ultra DMA mode 2 is currently active. Ultra DMA mode 3 is currently active. Ultra DMA mode 4 is currently active. Ultra DMA mode 5 is currently active. Ultra DMA mode 6 is currently active. Seagate Desktop HDD Product Manual, Rev. K...
Disable use of SATA features Enable read look-ahead (read cache) feature (default). Report full capacity available At power-on, or after a hardware or software reset, the Note default values of the features are as indicated above. Seagate Desktop HDD Product Manual, Rev. K...
S.M.A.R.T. Enable Operations S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status If an appropriate code is not written to the Features Register, the Note command is aborted and 0x 04 (abort) is written to the Error register. Seagate Desktop HDD Product Manual, Rev. K...
Page 41
ASIA/PACIFIC Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888 EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00 Publication Number: 100686584, Rev. K...