Performance, Recording And Interface Technology; Interface Technology; Recording Technology; Performance - Seagate ST200FP0021 Product Manual

Hide thumbs Also See for ST200FP0021:
Table of Contents

Advertisement

2.4
P
ERFORMANCE
2.4.1

Interface technology

480GB
MODELS
Interface
Serial ATA (SATA-II)
Interface Speeds
6Gb/s, 3Gb/s, 1.5Gb/s
Supported
Maximum Burst
600MB/s
Transfer Rate
Hot Plug Support
Yes
Native Command
Yes
Queuing Support
Trim Support
Yes
Lifetime Endurance
Yes
Management Option
2.4.2

Recording technology

Flash Memory Type
Emulated LBA Size (Bytes)
Native Programmable Page size (User Bytes)
Default transfer alignment offset
Typical Data Retention with Power removed (at 40°C)
2.4.3

Performance

Maximum Burst Transfer Rate (MB/s)
Peak sequential 128KB read/write data
transfer rate (MB/s max)
Sustained sequential 128KB
read/write data transfer rate (MB/s)
Peak 4KB random read/write command
rate (KIOPs)
Sustained 4KB random read/write
command rate (KIOPs)
[4]
Testing performed at Queue Depth = 32, Sequentially Preconditioned drive, using IOMeter 2006.7.27.
[5]
Testing performed at Queue Depth = 32, Randomly Preconditioned drive, using IOMeter 2006.7.27.
[6]
Testing performed at Queue Depth = 32, Non-Preconditioned drive, using IOMeter 2006.7.27.
Note.
IOMeter is available at
IOMeter is licensed under the Intel Open Source License and the GNU General Public License. Intel does not
endorse any IOMeter results.
Peak performance is defined as the typical best case performance that the product will be able to achieve when the
product is preconditioned as mentioned and host commands are aligned on 4KB boundaries.
Sustained performance is defined as the typical worst case performance that the product will be able to achieve when the
product is preconditioned as mentioned and host commands are aligned on 4KB boundaries. For models that support Lifetime
Endurance Management, write values also take into account the worst case performance throttling that may occur to ensure
the product meets specified reliability specifications.
Due to the nature of Flash memory technologies there are many factors that can result in values different than those stated
in this specification. Some discrepancies can be caused by bandwidth limitations in the host adapter, operating system, or
driver limitations. It is not the intent of this manual to cover all possible causes of performance discrepancies.
S
600 P
SSD P
EAGATE
RO
RODUCT
, R
ECORDING AND INTERFACE TECHNOLOGY
400GB
240GB
MODELS
MODELS
Notes
480GB
[4]
[4]
[5]
[5]
85/11
http://www.iometer.org/
M
, R
. A
ANUAL
EV
200GB
120GB
MODELS
MODELS
NAND MLC
512
8192
0
3 months
400GB
240GB
200GB
520
520/450
520/450
85/30
85/30
85/11
or http://sourceforge.net/projects/iometer/.
100GB
MODELS
120GB
100GB
520/300
520/300
80/20
85/30
85/8
85/20
5

Advertisement

Table of Contents
loading

Table of Contents