136
Self-help, Vehicle Care
5. Unscrew the wheel bolts.
If the wheel bolts have retaining
washers 3, they must not be removed.
6. Change wheel.
Notes on spare wheel 3 131.
Notes on temporary spare wheel 3 132.
7. Screw in the wheel bolts. Push the wheel
bolt wrench 3 on as far as possible and
tighten the wheel bolts slightly.
8. Lower vehicle.
9. Push the wheel bolt wrench 3 on as
far as possible and tighten in a crosswise
sequence. Tightening torque is 110 Nm.
10. Before refitting the wheel trim, clean the
wheel around the retaining clips. Valve
symbol 3 on back of wheel trim must
point towards valve on wheel.
Position and engage wheel trim.
Alloy wheels 3: Align and refit wheel
bolt caps 3.
11. Stow removed wheel with jack and
warning triangle 3 130, 3 133.
12. Check the tyre pressure of the newly
mounted wheel.
13. Have the wheel bolt tightening
torque (110 Nm) checked.
14. Replace the faulty tyre on the
wheel that was removed.