Vauxhall 2009 Tigra Owner's Manual page 139

3. The jacking points are marked on the
bottom edge of the vehicle.
4. Set the jack 3 to the necessary height.
Position the jack arm at the front or rear
so that the jack claw (arrowed in
illustration) spans the vertical base and
engages in the recess in the base. Make
sure it is securely positioned.
Self-help, Vehicle Care
The edge of the jack base must be on the
ground directly below the jacking point
in a manner that prevents it from
slipping.
Raise vehicle by turning crank handle.
If this edge of the jack base is no longer
directly below the jacking point, carefully
lower the vehicle immediately, reposition
the jack and raise the vehicle again.
135