Vauxhall 2009 Tigra Owner's Manual page 105

Starting the engine
When starting the engine, activate the
footbrake at the same time. The engine
can only be started in position N and with
the footbrake activated. The transmission
display shows "N". If the footbrake is not
activated, the control indicator j 3
illuminates in the instrument cluster and
"N" flashes in the transmission display; the
engine cannot be started.
Also the vehicle cannot be started if all
brake lamps have failed.
Operating Easytronic with the selector
lever
Always move the selector lever all the way
to the stop. Note the gear or mode
indicator in the transmission display.
Selector lever in N
Neutral.
Driving and Operation
Selector lever in o (centre position)
Once the selector lever has been moved
from N to position o (centre position) with
the footbrake depressed, the Easytronic is
in automatic mode and first gear has been
selected (second gear with Winter
programme enabled). "A" appears in the
transmission display.
When the footbrake is released the vehicle
starts to "creep". If the footbrake is not
depressed, "A" flashes. Start off by
pressing the accelerator immediately or
more selector lever back to N and repeat
procedure with footbrake depressed.
Shifting to different gears takes place
automatically in automatic mode,
depending on the driving conditions.
101