Transistor Hfe Measurement - UNI-T UT602 Operating Manual

Digital inductance capacitance meter
Table of Contents

Advertisement

E. Transistor hFE Measurement (see figure 7)
To measure transistor, set up the Meter as follows:
1.
Set the rotary switch to hFE measurement mode.
2.
Check that the transistor is PNP or NPN type.
3.
Insert the Insert the transistor to be measured to the
corresponding Transistor Jack
4.
The Meter displays the tested transistor's nearest value
Note:
l
When transistor measurement has been completed,
disconnect the connection between the testing clips and
the circuit under test and remove the testing clips away
from the input terminals of the Meter.
Model UT602/603: OPERATING MANUAL
(figure 7)
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ut603

Table of Contents