Measurement Operation; Measuring Resistance - UNI-T UT602 Operating Manual

Model UT602/603: OPERATING MANUAL

Measurement Operation

l
Make sure the Low Battery Display
otherwise false readings may be provided.
l
Pay extra attention to the
measurement, which is located besides the input
terminals of the Meter.
A. Measuring Resistance
Warning
To avoid damages to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before measuring resistance.
The resistance ranges are 20 , 200 , 2k , 20k , 200k ,
2M , 20M and 2000M .
To measure resistance, please connect the Meter as
follows:
1. Insert the red test clip into the
the black test clip into COM terminal.
2. Set the rotary switch to
3.
Connect the test clips across with the object being
measured.
The measured value shows on the display.
symbol, before carrying
(see figure 3)
(figure 3)
range.
11
is not on,
terminal and