Maintenance; General Service; Testing The Fuses - UNI-T UT60A Operating Manual

Maintenance (1)

This section provides basic maintenance information
including battery and fuse replacement instruction.
Warning
Do not attempt to repair or service your Meter unless
you are qualified to do so and have the relevant
calibration, performance test, and service information.
To avoid electrical shock or damage to the Meter, do
not get water inside the case.
A. General Service
l
Periodically wipe the case with a damp cloth and
mild detergent. Do not use abrasives or solvents.
l
To clean the terminals with cotton bar with detergent,
as dirt or moisture in the terminals can affect readings.
l
Press the POWER to turn off the Meter when it is
not in use and take out the battery when not using
for a long time.
l
Do not store the Meter in a place of humidity, high
temperature and strong magnetic field.
B. Testing the Fuses
Warning
To avoid electrical shock or personal injury, remove
the test leads and any input signals before replacing
the battery or fuse.
To prevent damage or injury, install ONLY replacement
fuses with identical amperage, voltage, and speed
ratings.
Model UT60A: OPERATING MANUAL
37