Measurement Operation; Ac & Dc Voltage Measurement - UNI-T UT60A Operating Manual

Measurement Operation (1)

A. AC & DC Voltage Measurement
Warning
To avoid harms to you or damages to the Meter from
electric shock, please do not attempt to measure
voltages higher than 1000V / 750V rms although
readings may be obtained.
AC Voltage Measurement
The AC voltage ranges are: 4.000V, 40.00V, 400.0V and
750.0V. To measure AC Voltage, connect the Meter as
follows:
1. Insert the red test lead into the HzV terminal and
the black test lead into the COM terminal.
2. Set the rotary switch to Hz
button to select AC measurement mode.
3. Connect the test leads across with the object being
measured.
The measured value shows on the display, which
is effective value of sine wave (mean value
response).
Model UT60A: OPERATING MANUAL
(see figure 3)
Red Black
(figure 3)
V and press BLUE
19