Cc Change The Prefix Character - Brother RJ-4030 Software Manual

^CC Change the prefix character
ASCII: ^
Decimal: 94
Hexadecimal: 5E
Parameters
00h≤nh≤FFh
Description
Changes the prefix character code.
n: Character code
The default text string for the prefix character is "^".
This command is a dynamic command.
Example
To change the prefix character from "^" to "_":
^ C C 5Fh
(5Eh 43h 43h 5Fh) (5Fh stands for "_" in ASCII code)
However, if the printer is later not turned off, then on again, the prefix character remains set to "_", and the
initialize command, for example, will be "_II" instead of "^II".
C C n
67 67 nd
43 43 nh
- 41 -
P-touch Template 2.0 Command Reference
7. Control Command Details