Esc Ixn2 Specify Number Of Numbering Copies - Brother RJ-4030 Software Manual

ESC iXN2 Specify number of Numbering copies

ASCII: ESC i
Decimal: 27
Hexadecimal: 1B
Parameters
nh1: 02h (Fixed)
nh2: 00h (Fixed)
00h≤nh3≤FFh
00h≤nh4≤03h
Description
Specifies the number of copies to be printed with Numbering.
nh3+(nh4*256): Number of Numbering copies (bytes) (1 to 999)
The default number of copies printed with Numbering is 1.
This command is a static command.
Example
To change the number of Numbering copies to 100:
Since nh3=64h and nh4=00h, the command will be as follows.
ESC i X N 2 02h 00h 64h 00h
(1Bh 69h 58h 4Eh 32h 02h 00h 64h 00h)
X N 2 n1
105 88 78 50 nd1 nd2 nd3
69 58 4E 32 nh1 nh2 nh3
n2 n3 n4
nd4
nh4
- 72 -
P-touch Template 2.0 Command Reference
7. Control Command Details