Esc Ixr2 Specify Print Start Received Character Count - Brother RJ-4030 Software Manual

ESC iXr2 Specify print start received character count
ASCII: ESC i
Decimal: 27
Hexadecimal: 1B
Parameters
nh1: 02h (Fixed)
nh2: 00h (Fixed)
00h≤nh3≤FFh
00h≤nh4≤03h
Description
Specifies the number of characters to be received in order to start printing.
nh3+(nh4*256): Print start received character count (bytes) (1 to 999)
The default print start received character count is 10.
This command is a static command.
Example
To change the print start received character count to 100 characters:
Since nh3=64h and nh4=00h, the command will be as follows.
ESC i X r 2 02h 00h 64h 00h
(1Bh 69h 58h 72h 32h 02h 00h 64h 00h)
X r 2 n1
105 88 114 50 nd1 nd2 nd3 nd4
69 58 72 32 nh1 nh2 nh3 nh4
n2 n3 n4
- 60 -
P-touch Template 2.0 Command Reference
7. Control Command Details