Tuning Into Stations Manually; Selecting Stored Stations; Storing Stations; Storing Stations Manually - Blaupunkt Hamburg MP68 Operating And Installation Manual

nouncements, the tuner exclusively ad-
justs traffi c information stations.
Note:
These settings are available only for FM.
An exact description of these settings
can be found in the following sections of
this chapter.

Tuning into stations manually

Notes:
•
Tuning into stations manually is pos-
sible only if the convenient RDS func-
tion is deactivated.
•
If the RDS function is activated, you
can scroll in the broadcasting net-
works in whose reception area you
are located.
u
Press the # button of the alphanumer-
9
ic keys .
"SEEK" and the current frequency or the
station name appear on the display.
u
Press the rocker switch or
change the frequency in increments of
100 kHz.
Note:
You can also activate the "SEEK" func-
tion by using the rocker switch
open the "Tune" menu and pressing the
2
OK button .

Selecting stored stations

u
Select the desired waveband or mem-
ory bank.
u
Press one of the station buttons
9
0 - 9 .
Or in the List menu:
u
Press the rocker switch
select a frequency or station from the
list.
u
Press the OK button
The stored station is called up, provided
that it can be received at the current vehi-
cle position.
The frequency of the station or the station
name appears on the display.

Storing stations

There are 2 ways of storing a station:
•

Storing stations manually

•
Searching and storing stations automat-
ically (Travelstore)
Storing stations manually
After tuning into a station, it can be stored
as follows:
u
Press one of the station buttons 0 - 9
:
to
for approx. 2 seconds to which you want
to assign the station.
Or in the List menu:
u
Press the rocker switch
select a memory location in the list.
:
to
u
Press and hold down the OK button
for approx. 2 seconds.
The list displays the frequency or the name
of the station at the selected memory loca-
tion. The station was stored.
Tuner mode
:
or to
2
.
9
:
or to
2
89