Activating/Deactivating The Signal Tone (Beep On); Setting The Speed-Dependent Volume Increase (Auto Snd); Changing Display Settings; Adjusting The Display Viewing Angle (Angle) - Blaupunkt Hamburg MP68 Operating And Installation Manual

Activating/deactivating the signal tone
(BEEP ON)
You can deactivate the signal tone that
sounds as a confi rmation in the menus or
when storing the stations on the station but-
tons.
u
In the System menu, press the rocker
:
switch or
"BEEP ON" menu item is selected.
u
Press the OK button
menu item.
u
Switch between the settings with the
rocker switch or
•
"BEEP ON "
•
"BEEP ON"
u
Press the OK button
ferent function, or press the DIS•ESC
;
button to exit the menu.
Setting the speed-dependent volume
increase (AUTO SND )
When you are driving faster, the device can
automatically increase the volume to com-
pensate for the driving noise. The volume is
increased depending upon the speed. In or-
der for this to work, the speedometer signal
must be connected as described in the in-
stallation instructions.
The optimum setting for this volume in-
crease depends on how noise levels devel-
op in your particular vehicle. Try the setting
that is perfect for your vehicle. You can se-
lect a value between OFF (no increase) and
5 (maximum increase).
repeatedly until the
2
to call up the
:
.
: Signal tone on.
: Signal tone off.
2
to select a dif-
u
In the System menu, press the rocker
:
switch or
"AUTO SND" menu item is selected.
u
Press the OK button
menu item.
The current setting is displayed.
u
Select the desired setting with the rock-
er switch or
u
Press the OK button
ferent function, or press the DIS•ESC
;
button to exit the menu.

Changing display settings

The following display settings can be
changed in the System menu:
•
Day/night brightness (D-DAY / D-
NIGHT)
•
Adjusting the display viewing angle
(ANGLE)
•
Adjusting the display color (DISP COL,
COL SCAN, CON SCAN)
Adjusting the display viewing angle
(ANGLE )
The angle at which the driver looks at the
display is dependent upon, among other
things, the installation position of the de-
vice, the seating position, and the physical
size of the driver. You can optimise the dis-
play contrast for your viewing angle:
u
In the System menu, press the rocker
:
switch or
"ANGLE" menu item is selected.
u
Press the OK button
menu item.
User settings
repeatedly until the
2
to call up the
:
.
2
to select a dif-
repeatedly until the
2
to call up the
127