Adjusting The Volume Of The Beep; Radio Operation; Switching To The Radio Mode; Selecting Wavebands/Memory Banks - Blaupunkt Honolulu CD50 Operating Instructions Manual

VOLUME CONTROL
Adjusting the volume of the
beep
For a number of functions you will hear
a beep if you press a key for longer than
2 seconds, e.g. if you want to store a
radio station on a station preset. You can
adjust the volume level of this beep.
Press MENU 8.
: repeatedly until
Press
"BEEP" appears in the display.
: to adjust the vol-
Press
ume. "0" means the beep volume is
off, "9" means the beep volume is
adjusted to the maximum volume.
Once you have adjusted the set-
tings, press MENU 8 or OK ;.
10

RADIO OPERATION

Radio operation

Switching to the radio mode

If you are currently using the CD player
or CD changer,
press CD•C @ repeatedly until
"RADIO" appears in the display.
Selecting wavebands/memory
banks
Using this car audio system, you can
tune into radio stations on the FM and
AM wavebands. There are three mem-
ory banks for the FM waveband and one
memory bank for AM.
You can store six stations in each of
these memory banks.
To switch between the different FM
memory banks , press FM 4.
To select the AM waveband, press
AM 5.

Tuning into radio stations

You can tune into radio stations in a
number of different ways.
Automatic seek tuning
Press or
The radio will tune into the next availa-
ble station within reception range.
Manual station selection
You can also tune into radio stations
manually.
Press or
:.
:.