Tuning Into Radio Stations; Adjusting Seek Tuning Sensitivity; Storing Radio Stations - Blaupunkt Casablanca CD50 Operating Instructions Manual

RADIO OPERATION

Tuning into radio stations

You can tune into radio stations in a
number of different ways.
Automatic seek tuning
Press or
The radio will tune into the next availa-
ble station within reception range.
Manual station selection
You can also tune into radio stations
manually.
Press or
Note:
You cannot use manual tuning unless
the RDS functions are deactivated.
Paging through the broadcasting
network (for FM only)
If a radio broadcasting network has
more than one station, you can page
through the "station network".
Press or
next station in the network.
Note:
To take advantage of this function, you
must have activated the RDS functions.
It is only possible to tune into those sta-
tions which have been received once
before already. To do this, use the SCAN
or TravelStore function.
38
:.
:.
: to tune into the

Adjusting seek tuning sensitivity

It is possible to adjust the sensitivity of
the seek tuning function to tune the ra-
dio into stations with strong reception
signals only, or to those with weaker
reception signals as well.
Press MENU 8.
: repeatedly until
Press
"SENS" appears in the display.
:.
Press
The currently selected setting will ap-
pear in the display. "SENS HI6" indicates
the highest level of sensitivity, "SENS
LO1" the lowest. If you select "SENS
LO", "lo" will light up in the display.
: to select the desired
Press
sensitivity.
Once you have made your selec-
tion, press MENU 8 or OK ;.

Storing radio stations

Storing radio stations manually
Select the desired memory bank
FM1, FM2, FMT or either MW or
LW.
Tune the radio into the desired sta-
tion.
Press and hold down one of the
station preset buttons 1 to 6 > on
which you want to store the radio
station for longer than two seconds.