Table of Contents
Advertisement
14. EASY THREAD
CHANGE TIE ON METHOD
:
To easily change thread type or color, clip thread near the spool,
and remove old spool of thread.
.
Place new thread on stand.
Tie new thread and old thread ends together with a
square knot.
Clip thread tails to 2~3cm (1 inch) length. If clipped too short,
threads may come untied.
Firmly pull both threads to test knot security.
-Raise presser foot to release tension discs.
Pull the threads through the machine one at a time.
If threads do not pull easily, check for tangles on thread guides or
looping under thread stand.
When pulling thread through the needles,
STOP
when the knot is in
front of the needle.
Cut the thread, and insert, in the eye of the needle.
28
Advertisement
Table of Contents
