Using Specialty Threads; Threading Lightweight Thread; Changing Threads; Threading Mediumweight Thread - Baby Lock Victory BLS3 Instruction And Reference Manual

U

Using Specialty Threads

S
Beautiful stitches can be formed by serging with specialty threads, cords and ribbons. These he-
I
avier or shinier threads can be used to enhance appearance, add strength or elasticity, or create
special effects, depending on the thread you choose.
N
G
Some specialty threads work well through the needle and loopers. There are some that are too
heavy for the needle and should only be used in the loopers.
Use the Specialty Thread Chart on pages 44 and 45 as a guide, keeping in mind that the threads
S
can vary from one manufacturer to another. Take time to test sew for best results.
P
E

Threading Lightweight Thread

C
Specialty thread used in the needle can be threaded in the usual way. The ease with which they
I
can be threaded in the loopers, however, depends on thread thickness.
A
L

Changing Threads

T
Y
1. Clip the existing thread at the cone and remove the cone from the spindle. (fig.A)
2. Place the new cone on the spindle. With the two threads together, tie an overhand knot, or
square knot. (fig.B)
3. Raise the presser foot, and pull the old thread from under the foot until the new thread comes
T
through the machine.
H
Note: When changing a needle thread, pull the thread through until it reaches the needle eye.
R
Then clip off the knot (fig.C) and rethread the needle eye manually or with the needle threader.
E
A
D
S
Threading Medium Weight Thread
Medium weight threads, including topstitching thread, Decor rayon and stretch nylon thread, are
too bulky to form a knot that would fit through the threading port, but they can slip through the hole
with the aid of a thread "cradle" made from regular serger thread. (page 41)
40
A A B B C C