Table of Contents
Advertisement
While holding thread with finger, pass it between the tension
3
discs and pull thread down to make certain it is properly
located in between the tension discs.
Thread the looper area of the machine following the blue color
coded thread guides 4~10.
Place the thread from right to left into thread guide.
4
Place the thread from right to left into thread guide.
5
6
Thread the balance of the lower looper area of the
7
machine following the blue color-coded thread guides,
8
placing thread in guides.
Thread the looper eye (A) from front to back. Pull about
9
10cm (4 inches) of thread and position into V cutout (B)
10
on threader. Firmly hold thread tail with left hand and pull
threader lever (C) up to place thread into correct position
(D) for sewing.
Note: Use tweezers provided in the accessory case to aid in
threading the looper.
3
17
10
9
8
7
4
5
9
A
B
3
4
5
6
8
7
6
10
D
C
Advertisement
Table of Contents
