Table of Contents
Advertisement
4 . HOW TO OPEN FRONT COVER
CAUTION
Be sure to turn off power switch.
CAUTION
Be sure front cover is closed when
sewing.
1
Push the cover to the right as far as it will go.
Pull cover down toward you.
2
5 . PRINCIPAL PARTS BEHIND THE FRONT
COVER
1
Upper looper
Moveable Upper knife
2
Presser foot
3
Fixed lower knife
4
Lower looper
5
6
Chain/Cover looper
Rolled Hem
7
Upper looper clutch / Driving clutch
8
6. CONNECTING MACHINE TO POWER
SUPPLY
Connect the machine/foot
1
receptacle.
2
Plug power line into electric outlet.
Power Switch: Push " l " mark side to turn "ON"
3
Push "O" mark side to turn "OFF"
To run the machine and control the speed, press
4
the controller.
The harder you press, the faster the machine will sew.
To stop the machine from sewing, remove your foot
from the controller.
Note: Always make sure that the machine is in the off
position, before connecting to power supply.
control plug
to the machine
1
2
3
7
4
ON
3
WARNING:
Use only foot controller provided with this machine.
(Type 4C-316B for U.S.A. & CANADA only)
Be sure to make reference to "Warning" on following
Page.
7
1
2
5
6
8
1
OFF
4
2
Advertisement
Table of Contents
