Chapter 4; Chapter 4: Configuring Contactstore; Verifying The Initial Settings - Avaya IP Office Installation Manual

Chapter 4

Chapter 4: Configuring ContactStore

Once you have completed the licensing, you need to verify the ContactStore configuration. In most
cases, the default settings for many of the configuration options in IP Office ContactStore are valid.
However, there are some settings that have no defaults. This chapter explains how to set these options.
Note: This chapter only discusses configuration settings that have no default value or whose default
value needs to be set or verified for your system. For a complete description of the System
Administration program, please see the IP Office ContactStore System Administration Guide.

Verifying the initial settings

There are some configuration details that must be set in order to safeguard the operation and
recoverability of your system. Any that cannot be left at automatic defaults are shown
appropriate administration page.
To complete the configuration, follow these steps:
1. From the System Settings>Server page, shown below, work through the Administration pages
from top to bottom of the navigation pane shown on the left of the page, or click on the Next >
link at bottom right of most pages to follow this logical order through the system configuration.
2. Verify that all settings are appropriate for your system; enter valid values for any that are shown
in red.
The following sections show the parameters that you need to verify or set appropriately.
ContactStore Installation Manual
IP Office 40DHB0002USEV Issue 1a (10th December 2004)
in red on the
Page 23