Passive Arming; Passive Door Locking; Active Disarming - Unlock & Disarm - Autopage RF-425LCD Operation Manual

PASSIVE ARMING:

Active arming / disarming is controlling your security system via the remote transmitter. This
security system is equipped with an optional Passive Arming feature, which allows the security
system to arm 30 seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the "OFF" position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you
reopen any door / hood / trunk, the security system LED will stop flashing. It will begin flashing
again once all vehicle entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically "ARM". The siren
will chirp [1] time and the parking lights will flash [1] time.

PASSIVE DOOR LOCKING:

The vehicle doors will automatically lock after passive arming cycle has been completed.
PASSIVE ARMING BY-PASS: While the system disarmed, press the
security will respond with [1] chirp and LED wi l l turn "ON". The security system will remain in
this temporarily state for as long as you wish. To exit passive by-pass, press the
button and the system will return to normal status.
ACTIVE DISARMING – UNLOCK & DISARM:
1. Press the button on the transmitter.
2. The siren will chirp twice and parking lights will flash twice to indicate that the security system
is now disarmed. The vehicle doors will unlock and disarm when interfaced with the security
system.
System Trunk/Hood
Disarm Trigger
Ignition
Trigger Clear the Flash Icon and Melody Sound: Cycle Ignition then press the
button first, within 3 seconds press
clear the flash icon and melody sound on the LCD screen transceiver
TAMPER DISARMING: If the alarm is triggered; upon disarming of the system, the siren will
chirp 4 times and parking lights will flash 3 times.
buttons twice, the
Doors Shock Sensor
Trigger Trigger
and buttons at the same time. It will
3
or