Active Arming - Lock & Arm; Active Disarming - Unlock & Disarm - Autopage C3-RS-915 LCD Operation Manual

Professional 2-way lcd remote car starter & alarm system with built in temperature & voltage sensor and two-way serial port data link
Table of Contents

Advertisement

SVMASTER
-
E. ACTIVE ARMING – LOCK & ARM:
button
1. Press
2.
The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle's doors will lock upon arming if interfaced with the security system.
DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid
ajar.
SILENT ARMING / DISARMING: Press the transmitter
disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the
vehicles parking lights only.
SENSOR BY-PASS:
The sensor bypass feature is programmed to activate for one arming cycle only. The security
system will return to normal operation during the next arming cycle.
Sensor By-Pass : Press the
and by-pass the shock sensor.
HIDDEN ALARM FUNCTION: Silent Alarm
Press the
button first; within 3 seconds press the
The security system will arm and with "Hidden Alarm Function" The siren / horn will be silenced
even if the sensor is triggered in the armed mode.
Transmitter.
F. PASSIVE ARMING (Programmable)
Active arming / disarming is controlled by your security system via the remote transmitter. This security
system is equipped with an optional Passive Arming feature which allows the security system to arm 30
seconds after the last door is closed. Operation is as follows.
1. Turn the ignition to the "OFF" position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once all vehicle
entrances are closed.
3. After the 30-second time has elapsed, the security system will automatically "ARM". The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
The vehicle doors will automatically lock after the passive arming cycle has been completed.
PASSIVE ARMING BY-PASS: While the system is disarmed, Press the
respond with [1] chirp and LED will turn "ON". The security system will remain in this temporary state for as
long as you wish. To exit passive by-pass, press the transmitter
to normal status.
G. ACTIVE DISARMING – UNLOCK & DISARM:
1. Press
button on the transmitter.
2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now
disarmed. The vehicle's doors will unlock and the dome light will turn on for 30 seconds upon disarming.
(Note: Power door locks and dome light must be installed with the security system.)
TAMPER DISARMING: If the alarm is triggered, upon disarm the system's siren will chirp 4 times, and the
parking lights will flash 3 times telling you the alarm has been triggered during the last armed state.
PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights
"ON" for 30 seconds and for 10 seconds upon the lock signal. (Programmable)
SVMASTER
-
C3 RS915 REV. O1
on the transmitter.
button two times within 5 seconds will arm the security system
-
and
buttons at the same time. This will arm or
button to activate the hidden alarm function.
Alarm indication will only appear on the LCD
button twice, the system will
or
buttons and the system will return
5
http://www.msvmaster.lv
http://www.msvmaster.lv
-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents