Download Print this page

Trigger Test - Autopage RF-303 Operation Instructions Manual

Advertisement

flash/hold sequence. Press the ON/OFF button on the remote transmitter. The
vehicle horn, or siren will chirp four (4) times, and the parking lights will flash four
(4) times. Enter vehicle in the normal manner.
H. IGNITION CONTROL POWER DOOR LOCK SYSTEM
When installed with remote power door lock/unlock, the vehicle's doors will
automatically lock when the ignition is switched on. The doors will automatically
unlock when the ignition is switched off. To avoid any undesirable lock-out, the
doors will not lock if any door is left open.
This feature is optional at the time of installation. If the ignition control door lock
system is not chosen, the doors will not lock automatically in the passive arming
mode. However, the doors will lock in the manual arming mode and in the
automatic rearming mode.
NOTE: Use of the ignition control power door lock system will not interfere
with any factory installed child door lock safety system.
NOTE: The ignition control door lock system is not designed to operate
vacuum/electric door lock systems as found on certain European vehicles.
I. TRIGGER TEST
After arming the RF-303 in either the passive or manual mode, test the system in
the following manner.
1. Open any door or other protected opening. The vehicle horn, or siren will
immediately begin sounding, and the parking lights will begin flashing.
2. If optional sensors have been installed, arm the RF-303 and test each sensor
according to the directions of the particular sensor.
8

Advertisement

loading