Planet FSD-804PS User Manual page 16

This show command list contains eleven items:
Show port [n] / all: Please refer to chapter 4.4.2.1.
Show static [n]: Please refer to chapter 4.4.2.2.
Show vlan: Please refer to chapter 4.4.2.3.
Show trunk: Please refer to chapter 4.4.2.4.
Show ip: Please refer to chapter 4.4.2.5
Show system: Please refer to chapter 4.4.2.6
Show poe status [n]: Please refer to chapter 4.4.2.7
Show poe [n]: Please refer to chapter 4.4.2.8
Show management vlan: Please refer to chapter 4.4.2.9
Show vlan mode: Please refer to chapter 4.4.2.10
Show pvid: Please refer to chapter 4.4.2.11
4.4.2.1 Show port[n] / all
Display the status on each port of FSD-804PS, these two commands allows you to view the port status of the Switch and
the correct usage is shown as below:
Show port [n]: n=1-8, to view per port status of FSD-804PS. The screen in
Show port: to view all port status of FSD-804PS. The screen in Figure 4-7
Figure 4-6 Per port Status screen
Figure 4-6 appears.
appears.
- 16 -