Bandwidth Manager Rear Panel - Planet BM-2002 User Manual

1.4 Bandwidth Manager Rear Panel

Power
On / Off
Port
Power
Power Switch
LAN Port
WAN Port
Factory Default
Reset
Console
LAN Port (10 / 100TX)
This is where you will connect the AC power cord.
100~240VAC is allowed.
You can turn on/off this device by the switch when the
power cord is connected
This is where you will connect the RJ-45 line to your local
switch or device. This port is MDI interface
This is where you will connect the RJ-45 line to your router
or ISP. This port is MDI interface
Press this button to have your BM-2002's setting set to
Factory Default
Press this button to have your BM-2002 device reboot
This port is reserved for manufacturer use only
BM-2002 Bandwidth Manager User's Manual
WAN Port
Reset button
Function
- 3 -
Console Port
Factory Default button