Bandwidth Manager Front View - Planet BM-2010A User Manual

1.3 Bandwidth Manager Front View

- Front View of BM-2100:
LCD Panel: Used to make IP settings, view IP settings, reboot system, show service information, reset
password and reset all configuration. It also show the average bandwidth usage for past 10 seconds when not
in configuration mode. Check section "Initial Setup by LCD panel" for detail on IP settings. The following
table shows the button function.
Button Function
(Enter) Used to select or confirm the selection
(ESC) Used to cancel the selection or back to previous
manual
(▲) Change to previous option or increase the
number. Press longer to increase the number by
10.
(▼) Change to next option or decrease the number.
Press longer to decrease the number by 10.
LED Panel: Used to show the system and connection status. The following table show the connection LED
definition.
LED Status
PWR Lit Green
STATUS Lit Red
LNK Lit Green
ACT Blink
Green
100 Lit Green
Off
- Front View of BM-2010A:
BM-2010A
BM-2010A / BM-2100 Bandwidth Manager User's Manual
ESC ENTER
LCD Panel
Meaning
Indicates the device is receiving power
Indicates the device is reading data
from momery
Link is established on LAN or WAN
port
Packets are transmitting or receiving
on LAN or WAN port
Indicates the link operate on 100Mbps
Indicates the link operate on 10Mbps
ESC ENTER
LCD Panel
LAN W AN
100 ACT LN K 100 ACT LN K PWR
BM-2100
LED Panel
LAN
POWER
10/100
STATUS LNK/ACT
LED Panel
- 3 -
Bandwidth Manager
Bandwidth Manager
WAN