Setting Up Internet Access To The Camera - Panasonic BB-HCM371A Installation/Troubleshooting Manual

Installation/Troubleshooting
1.6

Setting up Internet Access to the Camera

1.
Display the Camera List window (see page 17—page 18).
2.
Select the camera to set up and click [Execute].
• This program searches for the cameras that are connected to the router
and displays the MAC Addresses, IP addresses and Port Numbers.
• The MAC Address on the rear side (see page 14) of the camera shows
which camera you select on the Camera List window.
Note
If more than 20 minutes have passed since the camera was turned on, the
camera cannot be set up from the Setup Program. In this situation, restart the
camera.
22
MAC
Address
Port
No.
IP
Address
Camera
Status
Camera
List window
Displays IPv4 or
IPv6 information.