Setting The Original Size - Panasonic DP-C266 Operating Instructions Manual

Setting the Original Size

The original's size is usually detected automatically when an original is placed on the Platen Glass.
If the size is not detected automatically, or you would like to change the detected size, you can set the
Original Size manually by following the procedure below.
Icon of the original
is not displayed.
This feature is not available when the original is loaded on the ADF.
1
Place an original on the Platen Glass.
Face down. Align with the top
left corner. Close ADF.
Refer to Placing Originals (see page 14).
2
Press the Fax key.
3
Select "Basic Menu".
38
Original size is not detected
automatically.
Original size is not
detected correctly.
Detected Size
4
Select "Original Size".