Tally Lamp; Stop Button - Panasonic DVCPRO AJ-D410AP Operating Instructions Manual

Parts and their functions
7
1

TALLY lamp

This lights up when the unit is set to the recording mode. It
flashes when it is being transferred to the recording mode.
2
TALLY switch
This controls the back TALLY lamp 1.
ON : The back TALLY lamp is operational.
OFF : The back TALLY lamp is not operational.
3
External DC input socket
This is the input socket of the external power supply (DC power
supply). When an AC adapter is connected here, power is
automatically supplied from the external source.
4
AUDIO IN CH1, CH2 (audio input channel 1,
2) jacks (XLR, 3-pin)
An external microphone or line input signals are connected to
these jacks.
5
DC OUT (DC power supply) output socket
This normally serves as the DC 12 V output socket. A current of
approximately 1 A can be taken out.
6 VIDEO OUT jack (BNC)
This is the composite video jack for a monitor.
<Note>
When pictures are to be recorded with a backup VTR connected
to the VIDEO OUT jack, bear in mind that the unit's playback
pictures will be recorded onto the backup VTR if any operation
(such as REC CHECK) that performs VTR playback is
executed. Use the exclusive camera output jack for backup
recording.
7 PHONES (earphones) jack (mini jack)
The earphones (stereo) for monitoring sound are plugged in
here. When the earphones are connected, no sound will be
output from the speaker.
1
2
3
4
6 5
EJECT
;
8
REW (rewind)/FF (fast forward) buttons/
lamps
≥When one of these buttons is pressed in the stop mode, the
high-speed playback (rewind or fast forward) mode is
established, and the corresponding lamp lights.
≥ When the REW or FF button is pressed during playback, the
2a speed playback (rewind or fast forward) mode is
established; when it is pressed again, the 4a speed playback
(rewind or fast forward) mode is established.
Each time one of these buttons is pressed, the 2a speed
playback mode or 4a speed playback mode is selected
alternately.
≥ When the REW or FF button is pressed during STILL or REC
PAUSE, the 1a or so speed playback (rewind or fast forward)
mode is established while the button is held down. When the
button is released, operation returns to the original mode
(STILL or REC PAUSE).
The variable speed playback mode is released by pressing
the STOP button, PLAY/PAUSE button or EJECT button.
9

STOP button

The tape stops traveling when this button is pressed. However,
the button cannot be operated during recording.
recording, first set the unit to the REC/PAUSE mode, and then
press the STOP button.
:
PLAY/PAUSE button/lamp
Playback commences when this button is pressed, and the lamp
lights. When it is pressed again, the STILL mode is established,
and the lamp flashes.
When it is pressed once more, the playback mode is restored.
; EJECT button
When this button is pressed, the cassette holder rises, and the
cassette tape can be inserted or removed. This button cannot
be operated while the unit is recording, in which case first set
the unit to the REC/PAUSE mode, and then press the EJECT
button.
9
8 8
6
5
/REW FF/
STOP PLAY/PAUSE
ª
1/;
9 :
To stop